Lattner 48AF
SteamEase Series Electric Steam Bath Boiler, 48KW
Lattner 48AF, Electric Steam Bath Boiler, is engineered to power rooms up to 1,920 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
Designed for the most demanding commercial steam room environments, this SteamEase Series boiler system operates under pressure and is capable of steaming rooms (1-2) up to a total of 1920 cubic feet. Complete with incoloy heating elements, magnetic contactors, NEMA-1 panel with boiler and feedwater ON/OFF switch, lamps, McDonnell Miller primary water level control, auxiliary low water cut-off w/manual reset, operating pressure control, high limit w/manual reset, all internal ungrounded circuits subdivided and fused between contactors and source terminals, ASME safety valve, blowdown valve, feedwater stop and check valves, and water gauge set with ball checks and glass protector.
Lattner boilers employ a minimum 13" diameter X 23-1/4" long vessel with an unusual 284 square inch steam release area to ensure the production of dry steam without water carry-over. This large reservoir holds an impressive 13-gallons of water during operation and enables the use of superior low watt density immersion heaters. Additionally, the horizontal type boiler shell provides for an extremely large sediment collection area.
Also available in 480V/3PH, 240V/3PH and 240V/1PH operation. Consider the highly recommended 1674-B Automatic Blowdown System for automated on/off and drain capabilities.
NOTE: Additional Freight Charges May Apply.
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 48AF Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
| Model | 48AF |
|---|---|
| Minimum Adjusted Cubic Feet | 1440 |
| Maximum Adjusted Cubic Feet | 1920 |
| Kilowatt Rating | 48 KW |
| Shipping Weight | 650 lbs |
| AC Voltage | 208V AC |
| Phase | 3 Phase |
| Nominal Amperage | 133.4 Amps |
| Water Supply Connection | 3/4" NPT |
| Generator Steam Line Connection | 1-1/4" NPT |
| Length | 43" |
| Width | 29" |
| Height | 32" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Traps debris from entering into the steam solenoid.
Extending life of the steam solenoid's internal parts.
Helps prevent blockage of valve leading to overheating of room.
- Available in 1/2", 3/4" and 1"
- Threaded FPT x FPT
- Stainless Steel Screen
- Steam Rated
Noise reduction & more fog by reducing the flow rate with the Throttling Valve.
- Available in 1/2", 3/4" and 1"
- Threaded FPT x FPT
- Bronze Seat
- Steam Rated
- Multi-Turn Operation
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
This mounting stand raises the steam generator to the optimal service height for both safety and comfort, during maintenance and repair.
400LB Maximum Weight
Automatic Drain Valve to blow down boiler flushing debris. Helps prevent build-up of minerals and keeps water lines open.
See Shipping Tab
The Lattner 205 Aftercooler reduces the temperature of boiler discharge to meet or exceed local and national standards.
See Shipping Tab
This is the replacement thermometer for the blowdown separator.
See Shipping Tab
The simplest way to clean your equipment. No tools, no elbow grease; just pour it in, turn on the heat and let it work for you. An important part of any routine maintenance program for your steam unit or any equipment where scale or lime may build up.
A cleaner specially formulated for steam showers!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your steam shower.
A cleaner specially formulated for steam rooms! This economical concentrate makes up to four gallons.
This powerful disinfectant cleaner kills mold, mildew and odor-causing fungi on contact.
Bathology ScaleOut 430 reduces the negative effects of scale build-up. You can expect less generator downtime, extended heating element life, simplified preventative maintenance and a reduction in utility costs.
See Shipping Tab